NEMA GFCI Power Distribution stringer 120V 20A- Each block consists of two (2) 20 amp Ground Fault Circuit Interrupter (GFCI) Receptacles with weatherproof covers installed. The Blocks are integrally molded to heavy-duty SOOW cable. Stringers can be equipped with the appropriate Duraline or NEMA connectors, factory installed on cable ends.
P/N - M176100

Photo Sample 1

Watertight / Sealed GFCI in-line block 125V 20A with Molded Cover - This GFCI in-line block, tested for submersion in 3 feet of standing water, has a permanently sealed molded cover. The internal GFCI can be reset, from the top of the block, without having to remove a cover. The GFCI in-line block, available on three (3) conductor cable, can be used with socket streamers, barrier lighting, as well as our line of three wire plugs and connectors. This GFCI in-line block is specifically used for in-line applications. Add GFCI protection to almost any 120V Duraline System with a Watertight/Sealed GFCI in-line block.
P/N - M180790

Weatherproof Distribution Block, 120V 20A - (Max. input 55A, 120V - max. output 20A, 120V per receptacle; not to exceed total max. output of 55A, 120V) Used primarily in shipyard applications; this power distribution block starts with a 3M50 connector on 6/3 cable, which will distribute power to six (6) 3 wire replaceable female receptacles with protective weather caps, which mate with 3M20 male connectors (sold separately). Each receptacle is protected by a 20A GFCI circuit breaker with LED status. The circuit breakers are covered by a tear resistant membrane. A LEXAN cover with locking latch is also included for additional protection. An optional hook is available for hanging this block in a work area.
P/N - M181201