HACKER SAFE certified sites prevent over 99.9% of hacker crime.



Single and Multi-Gang High Amperage High Power

Plugs, Connectors and Receptacles.

120 Volt to 5000 Volts - 50 Amps to 1200 Amps in a Single Connector  

"Easy To Use, Worry Free Innovatively Designed"

   
 

Plug us in

for Safety

 

518 Micro, Jr. and Sr. Series Connectors and Receptacles

• 360 degree Patented non-specific orientation allows for easy mating and locking

• Integrally molded-In collet on male locks onto ball-nose shape of female connector. Locking ring slides forward over collet, to increase retention force of mated connectors

• Bodies and caps are molded Hypalon (registered trademark DuPont Dow Elastomers) chlorosulfonated polyethylene type 4085 rubber and contacts are copper alloy, locking rings are plastic

Key Benefits:

  • Duraline 518 Series- high power connectors feature an innovative 360-degree, ball and socket locking collet design. This allows the connector pairs to be mated and locked without regard to a specific orientation. There is no cam or keyway to line up, and there are no polarizing positions or twisted cables to worry about. When engaged, the locking ring provides positive locking force while allowing free rotation, even with rigid cables
  • 518 Series- high power connectors are designed and tested for AC or DC applications requiring currents from 50 to 1000 amps and voltages up to 5KV, in a single connector. Multiple connectors can be used to achieve higher ampere ratings (ex. 2000A –See Multi-Gang Housings and Panels) Connectors are provided on 600-Volt cable (standard) and include waterproof caps. 1KV, 2KV and 5KV cable is also available. Connectors are available in a variety of colors to allow for phase identification. Mated pairs are fully watertight and are ideally suited for use in areas that are generally hosed down with water under pressure as part of clean-up procedures.
  • 518 Series- connectors are ideal for use on railroad cars, power plants, generators, tunnels, oil rigs, refineries, aircraft carriers… anywhere a high power quick disconnect would be used
  • 518 Series- connectors can be manufactured to conform to IEEE-383 for class 1E applications for use in nuclear-fueled power plants. Since these crews must work under limited allowable time exposures, the quick-connect and disconnect characteristics of the 518 Series connector makes them quite desirable

All 518 Series connectors are built to customer's electrical specifications (voltage, amperage, cable size and color codes)

The Duraline 518 Series high power connectors consist of three groups of connectors:

   
HOME PRODUCTS NEWS FACTORY REPS MORE INFO CONTACT US  

Duraline 75 Hoffman Lane, Islandia NY 11749    Tel: 631-234-2002    Fax: 631-234-2360
All rights reserved 2003    Privacy Policy     Warranty
     Terms & Conditions     Customer Service