Plug us in

for Safety

Duraline's Rubber Molded Multi-Pin Electrical Plugs, Connectors Receptacles are Factory Mutual Tested and Approved, exceed O.S.H.A requirements, and are suitable for IEC Class IP67, IP68 and or Nema 6 applications.

Duraline Quick disconnect Multi-Pin Plugs Connectors wire devices are constructed using the highest quality materials to insure long life and trouble-free operation. Each connector is thoroughly inspected and repeatedly tested during the manufacturing process. All Duraline connectors are molded in Hypalon (registered trademark DuPont Dow Elastomers) chlorosulfonated polyethylene type 4085 rubber permanently bonded to heavy duty cable. The connector's unique seal designs isolates one contact from each other and creates a watertight / weatherproof seal allowing the mated pairs to be immersed in up to 6' of water ( IP68 rated plugs ). The ground contact is designed to make first and break last for increased safety.

Applications for our Electrical Connectors are growing every day, included are Food Processing, Mining, Amusement Parks, Entertainment Industry, Cruise Lines, Shipyards, Oil Refineries, Sewage Treatment Plants, Petrochemical, Utility, Construction, Marine, Medical, Automotive, Roadway Lighting, and other Indoor/Outdoor Applications. Many styles IP68 Rated Rated Watertight Submersible

Duraline 2 Wire Quick Disconnect  Plugs Connectors and Receptacles

Products currently in this section include connectors ranging from 1 amp thru 30 amps 600 volt max.

This section contains a small selection of our 2 pole rubber molded weatherproof / watertight  2 wire AC or DC products which range from a single Ampere to 100 Amperes. If your requirement cannot be filed by one our standard products we can custom design one that does. Our custom design process allows for quick turnaround and tool design and can accommodate short and long runs. Many styles IP68 Rated Rated Watertight Submersible

This section contains our 3 pole Tamper Proof products. These products allow only authorized access via a specialized Keyway Plug. The Female Receptacle is mounted inside a pole or electric panel with only the Female Key opening exposed. The Male Key is given only to authorized users limiting access to 120 Volt power. The user inserts and turns the Male Key allowing power to flow to the NEMA 5-15 connector which in turn can be used to power any 120 Volt 15 Amp Tool. Both the plug and receptacle are protected by replaceable fuses.

Products currently in this section include connector's ranging from 1 amp thru 100 amps 600 volts max.

This section contains a small selection of our 3 pole AC or DC products which range from a single Ampere to 110 Amperes. If your requirement cannot be filed by one our standard products we can custom design one that does. Our custom design process allows for quick turnaround and tool design and can accommodate short and long runs. Many styles IP68 Rated Rated Watertight Submersible

Products currently in this section include connector's ranging from 10 amp thru 110 amps 600 volts max.

This section contains a small selection of our 4 wire AC products which range from a single Ampere to 100 Amperes. If your requirement cannot be filed by one our standard products we can custom design one that does. Our custom design process allows for quick turnaround and tool design and can accommodate short and long runs.

Products currently in this section include connector's ranging from 1 amp thru 15 amps 600 volts max.

This section contains a small selection of our 5 wire AC products which range from a single Ampere to 50 Amperes. If your requirement cannot be filed by one our standard products we can custom design one that does. Our custom design process allows for quick turnaround and tool design and can accommodate short and long runs.

Products currently in this section include connector's ranging from 1 amp thru 30 amps 600 volts max.

This section contains a small selection of our 6 wire AC products which range from a single Ampere to 30 Amperes. If your requirement cannot be filed by one our standard products we can custom design one that does. Our custom design process allows for quick turnaround and tool design and can accommodate short and long runs.

Products currently in this section include connector's ranging from 1 amp thru 7 amps 600 volts max.

This section contains a small selection of our 14 and 16 wire AC products which range from a single Ampere to 7 Amperes. If your requirement cannot be filed by one our standard products we can custom design one that does. Our custom design process allows for quick turnaround and tool design and can accommodate short and long runs.