Duraline Preheat Welding Systems for Shipbuilding and Stick Welding


Duraline Distribution Systems for
Preheat, Heat Treating Systems
 
Commercial System "B" (JBB) Thermostatically Controlled Factory Mutual (FM) System
    
   

30FP4X Female Connector Photo is Coming Soon

30FP4X Female Connector Molded to 10/4 SOOW Cable. Connect to 30 Amp 3 Phase Safety Switch (Customer Supplied)

PDF Drawing

   

Primary Distribution Spider with 30MFP4X Male Fused Plug Input Photo is Coming Soon

Primary Distribution Spider with 30MFP4X Male Fused Plug Input, Phase Splitting Molded to 10/4 SOOW Cable to Three Outputs Molded to 14/3 105 Deg C SOOW Cable with a 30FP316 Female Connector on each end. M162700

PDF Drawing

   

Secondary Spider with a 30MFP316 Male Fused Plug Input is Coming Soon

Secondary Spider with a 30MFP316 Male Fused Plug Input Molded to 14/3 105 Deg C SOOW Cable, to Two Outputs Legs Molded to 14/3 105 Deg C SOOW Cable with a 15FP3 Female Connector on each end. M162800

PDF Drawing

   

Thermostatically Controlled Smart Heater

Click More Info Button for Available

Heater Sizes

 

Thermostatically Controlled Smart Heaters - 36" or 72" Long

The Duraline Smart Heater is the first electrical resistance heater with independent thermostatic control. It cuts your energy cost and man hours by monitoring and controlling the temperature at each weldment automatically. Independent lab test prove the Smart Heater will save you more than 30% in energy cost alone.

The heater is constructed of a sheathed, nichrome electrical heating element formed into a hairpin shape. It is clamped to a heavy aluminum contact shoe for optimum heat transfer. Heater is Equipped with a 30MFP316 Male Fused Plug Molded to 14/3 105 Deg C SOOW Cable,

FM Tested and Approved and meets OSHA requirements.

More InformationPDF Drawing

   

Thermostatically Controlled Smart Heater

Click More Info Button for Available

Heater Sizes

 

Thermostatically Controlled Smart Heaters - 12", 18", or 24" Long

The Duraline Smart Heater is the first electrical resistance heater with independent thermostatic control. It cuts your energy cost and man hours by monitoring and controlling the temperature at each weldment automatically. Independent lab test prove the Smart Heater will save you more than 30% in energy cost alone.

The heater is constructed of a sheathed, nichrome electrical heating element formed into a hairpin shape. It is clamped to a heavy aluminum contact shoe for optimum heat transfer. Heater is Equipped with a 15MP-3 Male Plug Molded to 14/3 105 Deg C SOOW Cable.

FM Tested and Approved and meets OSHA requirements.

More InformationPDF Drawing

   

HACKER SAFE certified sites prevent over 99.9% of hacker crime.    We accept Visa, MasterCard, American Express, and Discover, as well as new and existing Net Terms accounts. Credit card logos.