Duraline Preheat Welding Systems for Shipbuilding and Stick Welding

Duraline Distribution Systems for

Preheat, Heat Treating Systems

Commercial System "A" (CBI) Thermostatically Controlled Factory Mutual (FM) System

P4S Fiberglass Panel With 50' Input of 2/4 SOOW Cable. Panel Includes 6 Output 30FR4X Female Receptacles. P162600

Primary Spider with a 30MFP4X Male Fused Plug Phase Splitting Input Molded to 10/4 SOOW Cable, to Three Output Legs Molded to 14/3 105 Deg C SOOW Cable with a 30FP316 Female Connector on each end. M162700

Secondary Spider with a 30MFP316 Male Fused Plug Input Molded to 14/3 105 Deg C SOOW Cable, to Three Output Legs Molded to 14/3 105 Deg C SOOW Cable with a 15FP3 Female Connector on each end. M162801

Click More Info Button for Available

Heater Sizes

Thermostatically Controlled Smart Heaters - 36" or 72" Long

The Duraline Smart Heater is the first electrical resistance heater with independent thermostatic control. It cuts your energy cost and man hours by monitoring and controlling the temperature at each weldment automatically. Independent lab test prove the Smart Heater will save you more than 30% in energy cost alone.

The heater is constructed of a sheathed, nichrome electrical heating element formed into a hairpin shape. It is clamped to a heavy aluminum contact shoe for optimum heat transfer. Heater is Equipped with a 30MFP316 Male Fused Plug Molded to 14/3 105 Deg C SOOW Cable,

FM Tested and Approved and meets OSHA requirements.

Click More Info Button for Available

Heater Sizes

Thermostatically Controlled Heaters - 12", 18", or 24" Long

The heater is constructed of a sheathed, nichrome electrical heating element formed into a hairpin shape. It is clamped to a heavy aluminum contact shoe for optimum heat transfer. Heater is Equipped with a 15MP-3 Male Plug Molded to 14/3 105 Deg C SOOW Cable.

FM Tested and Approved and meets OSHA requirements.