|
Duraline Distribution Systems for
Preheat, Heat Treating Systems
Thermostatically
Controlled Factory Mutual (FM) System
|
| |
|
|
 |
4P4SCRR 4 Outlet
Distribution Panel with Four Replaceable Receptacles Molded to 50' 2/4
SOOW Cable. M129500
 |
|
|
|
|
 |
30FR4X Panel Mount
Receptacle
May Be Use instead of 4P4SCRR Outlet
Distribution Panel
 |
|
|
|
|
 |
3B20-6SR Phase Splitting 6
Outlet Distribution Block
Block Contains Six Replaceable
Receptacles Molded to 100' 10/4 SOOW Cable a 30MFP4X Male Fused Plug 3
Phase 480 Volt with 30 Amp Fuses is Molded to the other end.
 |
|
|
|
|
 |
Distribution Spider
Includes a
30MFP316 Male Fused Plug on Input Side Fused at 15 Amps 480 Volts and
Three Output 15FP3 Female Connectors Molded to 14/3 SOOW 105 Deg C
Cable. M162801
 |
|
|
|
|

Click More Info Button for
Available
Heater Sizes
|
Thermostatically
Controlled Smart Heaters - 12", 18" or 24"
The Duraline Smart Heater is the first
electrical resistance heater with independent thermostatic control. It
cuts your energy cost and man hours by monitoring and controlling the
temperature at each weldment automatically. Independent lab test prove
the Smart Heater will save you more than 30% in energy cost alone.
The heater is constructed of a sheathed,
nichrome electrical heating element formed into a hairpin shape. It is
clamped to a heavy aluminum contact shoe for optimum heat transfer.
The heater is equipped with a 15MP-3 Male Plug Molded to 14/3 SOOW 105
Deg C Cable. 480 Volts Single Phase
FM Tested and Approved and meets OSHA
requirements.
  |
|
|
|
|

Click More Info Button for
Available
Heater Sizes
|
36" Thermostatically
Controlled Smart Heaters
The Duraline Smart Heater is the first
electrical resistance heater with independent thermostatic control. It
cuts your energy cost and man hours by monitoring and controlling the
temperature at each weldment automatically. Independent lab test prove
the Smart Heater will save you more than 30% in energy cost alone.
The heater is constructed of a sheathed,
nichrome electrical heating element formed into a hairpin shape. It is
clamped to a heavy aluminum contact shoe for optimum heat transfer.
The heater is equipped with a 30MFP316 Male Fused Plug Molded to 14/3 SOOW
105 Deg C Cable,. 480 Volts Single Phase
FM Tested and Approved and meets OSHA
requirements.
 
|
|
|
|