Duraline Highway Lighting Systems


		3B30-2 Highway Block/FTP-2 Female Connector The 3B30-2 Block is provided with three #10/1 wires to tap into existing underground power. A 10/2 cable is molded into the block and exits opposite the 10/1 wires. The 10/2 cable is terminated with a red FTP-2 female connector, which mates to the Surge Arrestor cable assembly. The molded block has one three-wire outlet for the fused distribution cable assembly.

		3MFP-5 Fused Cable Assembly The Fused Cable Assembly includes a male 3MFP-5 fused plug molded to 14/3 cable. The other end is terminated with an orange female FTP-3 connector which mates with the MTP-3 Cable Assembly for Pole. The fused plug mates with the 3B30-2 Block.

		MTP-2 Male Surge Arrestor Cable Assembly The MTP-2 Male Plug is molded in red to 10/2 cable and is terminated with a surge arrestor. The MTP-2 plugs into the FTP-2 connector on the Fused Distribution Cable Assembly.

		MTP-3 Male Cable Assembly for Pole The MTP-3 Male Plug is molded in orange to 14/3 cable. The MTP-3 plugs into the FTP-3 connector on the Fused Cable Assembly.

		M182700 Connector Maintenance Kit This kit includes all the materials need to maintain all Duraline connectors as well as our Lighting products. Maintenance Kit Contents (1) Can of Electrical Contact Cleaner (1) Can of Silicone Spray Lubricant (1)ea 1/4”, 3/8", 1/2", 1" diameter Nylon Tube Brush (1) Sheet of Fine grit Emery Cloth

		A243100 Replaceable Pin 30 Amp Max Orange The 1/4" replaceable pin that came with your fuse plug should be checked regularly and replaced whenever there is wear or damage. Failure to replace damaged or worn pins void its IP68 Rating. Kit Includes (1) Molded Pin

		A006051 Pin Removal Tool This tool allows for quick removal and installation of replaceable pins. Used on all Duraline Male Fused Plugs. Kit Includes (1) Removal Tool