Duraline Highway Lighting Systems


		3B30-1 Highway Block The 3B30-1 Block is provided with three integrally molded #10/1 wires to tap into existing underground power. It also has one three-wire outlet to mate with the fused distribution cable assembly.

		Fused Distribution Cable Assembly The Fused Distribution Cable Assembly is comprised of a 3MFP10 male fused-plug on of 10/3Cable. The cable is molded to a two-way junction and splits into two legs of cable. A red female FTP-2 connector is molded to the 10/2 cable and an orange FTP-3 connector is molded to the 14/3 cable. The FTP-2 connector mates with the MTP-2 Surge Arrestor Cable Assembly. The FTP-3 mates with the MTP-3 Cable Assembly for the Pole.

		MTP-2 Male Surge Arrestor Cable Assembly The MTP-2 Male Plug is molded in red to 10/2 cable and is terminated with a surge arrestor. The MTP-2 plugs into the FTP-2 connector on the Fused Distribution Cable Assembly.

		MTP-3 Male Cable Assembly for Pole The MTP-3 Male Plug is molded in orange to 14/3 cable. The MTP-3 plugs into the FTP-3 connector on the Fused Distribution Cable Assembly.

		M182700 Connector Maintenance Kit This kit includes all the materials need to maintain all Duraline connectors as well as our Lighting products. Maintenance Kit Contents (1) Can of Electrical Contact Cleaner (1) Can of Silicone Spray Lubricant (1)ea 1/4”, 3/8", 1/2", 1" diameter Nylon Tube Brush (1) Sheet of Fine grit Emery Cloth

		A243100 Replaceable Pin 30 Amp Max Orange The 1/4" replaceable pin that came with your fuse plug should be checked regularly and replaced whenever there is wear or damage. Failure to replace damaged or worn pins void its IP68 Rating. Kit Includes (1) Molded Pin

		A006051 Pin Removal Tool This tool allows for quick removal and installation of replaceable pins. Used on all Duraline Male Fused Plugs. Kit Includes (1) Removal Tool