Plug us in

for Safety

Click Here for Large Picture Detailing

 Duraline's Exclusive Heavy Duty

Sockets !!

Duraline's Rubber Molded Portable Lighting Systems are Factory Mutual Tested and Approved, for indoor / outdoor wet locations,  exceed O.S.H.A requirements, and are available with plugs suitable for IEC Class IP67and Nema 6 applications. These products are widely used in shipyard temporary lighting, cruise ship string lighting, construction site temporary, carnivals tent lighting, temporary lighting in buildings, task lighting, tunnel construction, highway construction lighting, bridge decorative and temporary lighting and mining industries for over 55 years.

These Lighting Systems provide safe overhead temporary lighting and easy to use task lighting. All Duraline Lighting products are molded to heavy duty type SOOW 600 volt cable in solid Hypalon (registered trademark DuPont Dow Elastomers) chlorosulfonated polyethylene type 4085 rubber. Lamps are sealed by a rubber "O" ring molded into each socket on all of Duraline's Lighting Systems. This "O" ring forms a watertight seal around the neck of each bulb eliminating problems associated with oil, dirt and moisture.

Lighting Streamers Stringlights are available in Vapor Proof and Non Vapor Proof and all come ready to hang. Sockets come spaced at 10 ft intervals standard but almost any spacing can be manufactured. Vapor Proof Lighting also includes a Pyrex Globe and guards are optionally available on all Lighting products.

Lighting streamers are available in 2, 3, 4 and 5 wire configurations to extend the length of the light string without the need for booster transformers and can accommodate 120 and 220 volt  lamps

Duraline's lamp sockets have been tested to seal out water per MIL-F-16377/39A,

MIL-F-16377G and MIL-STD-108E (3' of water for 1 hour) if accidentally submerged. While they have been tested and approved this practice is not recommended as hot lamps may burst when contacting cold water creating a safety hazard. Use of lexan rain guards, rough service coated lamps and GFCI protection increase overall system safety. Budget Miser sockets are not built to a Mil Standard but have been tested to seal out water.

Duraline lighting products are suitable for IEC Class IP67 and Nema 6 applications.

All lighting products can use a 100 watt max incandescent (A21 Size Recommended) lamp or 32 watt max fluorescent (130 watt equivalent) lamps now available from Duraline. 

Non Vapor-Proof Lighting Page

Go to Vapor-Proof Wet Location page

Click Here For Lamp Guard Options

Heavy-Duty Lighting Streamer / String lights  (3-Wire Sockets)

Heavy-Duty Light Streamer sockets are similar to, but more ruggedly built than the Budget Miser line. These sockets include a heavy-duty, internal crush-proof ring around the screw shell, an external grounding ring and a molded-in, heavy-duty hanging grommet. Socket bodies are molded of durable Hypalon (registered trademark DuPont Dow Elastomers) chlorosulfonated polyethylene type 4085 rubber, and each socket is integrally molded to type SOOW cable.

Suitable for use in indoor or outdoor wet locations. Available with Optional Weather-Proof GFCI protection  and/or On/Off Switch. Meets O.S.H.A and NEC Requirements.

Budget Miser Lighting Streamer System / String lights – BM-755  (2-Wire Sockets)

Budget Miser light sockets have been designed to provide safe, dependable lighting for limited budget projects. Socket bodies are molded of durable Hypalon (registered trademark DuPont Dow Elastomers) chlorosulfonated polyethylene type 4085 rubber, and each socket is integrally molded to type SOOW cable.

Suitable for use in indoor or outdoor wet locations. Available with Optional Weather-Proof GFCI protection and/or On/Off Switch.  Meets O.S.H.A and NEC Requirements.

Great for Bridge Lighting, Tunnel Lighting, Construction Lighting, Dress Ship Lighting, Tent Lighting and                 Indoor / Outdoor String Lights.

Click Here For Lamp Guard Options

Heavy-Duty Light Streamer without external ground ring is a 2-wire socket on 3-wire cable. This streamer socket has all the features of the 3-wire socket but does not include the external brass grounding ring at each socket, the ground wire continues thru uninterrupted. These sockets include a heavy-duty, internal crush-proof ring around the screw shell and a molded-in, heavy-duty hanging grommet. Socket bodies are molded of durable Hypalon (registered trademark DuPont Dow Elastomers) chlorosulfonated polyethylene type 4085 rubber, and each socket is integrally molded to type SOOW cable.

Suitable for use in indoor or outdoor wet locations. Available with Optional Weather-Proof GFCI protection  and/or On/Off Switch. Meets O.S.H.A and NEC Requirements. Great for Bridge Lighting, Tunnel Lighting, Construction Lighting, Dress Ship Lighting, Tent Lighting and Indoor / Outdoor String Lights.

Waterproof Hand light with Switch– HLS-760

Waterproof Molded Switch Light sockets are constructed identically to Duraline’s Heavy-Duty Light Streamer sockets except they are designed as a portable task light / trouble light and do not include hanging grommets. These sockets include a heavy-duty, internal crush-proof ring around the screw shell and an external grounding ring. The hand-light features an encapsulated switch, which is molded into the body of the hand light / work light and is watertight. The assembly is molded of durable Hypalon (registered trademark DuPont Dow Elastomers) chlorosulfonated polyethylene type 4085 rubber, and each socket is integrally molded to type SOOW cable.

2 and 3-Wire Hand lamps sockets are constructed identically to Duraline’s Heavy-Duty Light Streamer sockets except they are designed as a portable task lights / trouble lights and do not include hanging grommets. These sockets include a heavy-duty, internal crush-proof ring around the screw shell and an external grounding ring. The assembly is molded of durable Hypalon (registered trademark DuPont Dow Elastomers) chlorosulfonated polyethylene type 4085 rubber, and each socket is integrally molded to type SOOW cable.

Maintenance Kit Contents

(1)      Can of Electrical Contact Cleaner

(1)      Can of Silicone Spray Lubricant

(1)ea  1/4”, 3/8", 1/2", 1" diameter Nylon Tube Brush

(1)      Sheet of  Fine grit Emery Cloth

Duraline 27 Watt 120 Volt Compact Fluorescent Lamp
 

The Duraline 27 Watt 5100°K lamp is energy efficient using only 27 watts

of power but puts out 100 watts of equivalent incandescent light.

Light output is  1850

Energy use      27 watts    .390 amps

Color Temp      5100°K

Life hours        10,000 

Duraline Part Number 007509  Sold In Case Quantities only.

Duraline 32 Watt 120 Volt Compact Fluorescent Lamp
                                        NOW AVAILABLE WITH OPTIONAL SHATTER SHIELD COATING

The Duraline 32 Watt 5100°K lamp is energy efficient using only 32 watts

of power but puts out 130 watts of equivalent incandescent light.

Light output is  2100 lumens

Energy use      32 watts   .530 amps

Color Temp      5100°K

Life hours        10,000  *Note lamp life reduced when used in Vapor Proof Fixtures*

Duraline Part Number 007510 Sold In Case Quantities only.

Duraline Part Number 007538 Shatter Shield Sold In Case Quantities only.

Duraline 100 Watt 120/130 Volt Rough Service Frosted Teflon

Coated Incandescent Lamp
 

The Duraline 100 Watt incandescent lamp is a rough service lamp

with shatter protection silicone coating.

Lamp Type    A21 100 Watt RS/TF 120/130

Energy use    100 watts

Life hours      1000

Duraline Part Number 007515 Sold In Case Quantities only.

Duraline 100 Watt and 75 Watt 12 Volt Low Voltage

Frosted Incandescent Lamp
 

The Duraline 100 and 75  Watt Low Voltage Incandescent lamps are for

use with all 12 Volt Vapor-Proof Hand Lamps and Lighting Streamers

Lamp Type    A21   75 Watt FR 2WR

Lamp Type    A21  100 Watt FR 2WR

Duraline Part Number 005130 75 Watt Sold In Case Quantities only.

Duraline Part Number 005132 100 Watt Sold In Case Quantities only.